两个基于2,5-二甲氧基对苯二甲酸和咪唑衍生物的超分子钴配位聚合物的结构及光催化反应

本文以咪唑衍生物为配体,通过水热合成法与钴离子制备出两个配位聚合物:{[Co(DTA)(1,4-DIB)(H₂O)]·H₂O}_n(1)和[Co(DTA)(1,3-BMIB)]_n(2)(1,4-DIB=1,4-二(1H-咪唑-1-基)苯; 1,3-BMIB=1,3-二(4-甲基-1H-咪唑-1-基)苯;H₂DTA=2,5-二甲氧基对苯二甲酸)。利用X射线单晶衍射、粉末衍射、热失重、元素分析、红外光谱以及固体紫外-可见光谱等对两个配合物进行了表征。结构分析证实配合物1和2是通过二维结构堆积成的三维超分子化合物。粉末衍射测试则显示两个配合物在水中有很好的稳定性。固体紫外-可见光谱显示两个配合物属半导体材料,对紫外-可见光有很强的吸收作用。在光催化实验中,配合物1和2可加快亚甲基蓝的降解速度。     

Impact of anisotropic slip on the stagnation-point flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid

The characteristics of heat transfer in the three-dimensional stagnationpoint flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid with anisotropic slip are investigated. The partial differential equations are converted into a system of ordinary differential equations by valid similarity transformations. The simplified mathematical model is solved computationally by the bvp4c approach in the MATLAB operating system. This solving method is capable of generating more than one solutions when suitable initial guesses are proposed. The results are proven to have dual solutions, which consequently lead to the application of a stability analysis that verifies the achievability of the first solution. The findings reveal infinite values of the dual solutions at several measured parameters causing the non-appearance of the turning points and the critical values. The skin friction increases with the addition of nanoparticles, while the escalation of the anisotropic slip effect causes a reduction in the heat transfer rate.     

颗粒材料三维应力路径下的接触组构特性

颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法(如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method,DEM)进行一系列等$p$等$b$应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.      

Controlled quantum teleportation of an unknown single-qutrit state in noisy channels with memory

This paper proposes a three-dimensional(3 D) controlled quantum teleportation scheme for an unknown single-qutrit state. The scheme is first introduced in an ideal environment, and its detailed implementation is described via the transformation of the quantum system. Four types of 3 D-Pauli-like noise corresponding to Weyl operators are created by Kraus operators: trit-flip, t-phase-flip, trit-phase-flip, and t-depolarizing. Then, this scheme is analyzed in terms of four types of noisy channel with memory. For each type of noise, the average fidelity is calculated as a function of memory and noise parameters, which is afterwards compared with classical fidelity. The results demonstrate that for trit-flip and t-depolarizing noises, memory will increase the average fidelity regardless of the noise parameter. However, for t-phase-flip and trit-phaseflip noises, memory may become ineffective in increasing the average fidelity above a certain noise threshold.     

卫星运动预测及规避的建模与求解

近年来,随着各国侦查卫星系统的不断完善,有效根据观测数据预测卫星的轨迹,同时建立适当的规避防范措施变得尤为重要·通过研究地面监测站监测的卫星数据及地理信息,提出了一种基于三维坐标系变换的卫星轨迹求解模型,具体建立模型的方法为:建立4种不同的坐标系,通过卫星坐标在4种坐标系中的变换,将地面检测站检测到的卫星数据进行处理,拟合出卫星的六个运动参数,得出卫星运动轨迹方程,并较为精准的预测卫星被观测站观测到的情况,以及任意时刻星下点的经纬度坐标.针对卫星的运动情况,为满足我方军事目标的运动需求,根据新疆地图建立军队行军路线的有向图,然后,在考虑卫星规避的情况下对每条路线进行模拟分析,最终,通过每条路线模拟分析的结果进行比对,得出最优的行军路线.     

3D-ASL灌注成像与静息态功能MRI在癫痫诊断及鉴别中的价值

选取123例癫痫患者作为研究组,同期69例健康体检者作为对照组,均行三维动脉自旋标记技术(3D-ASL)灌注成像与静息态功能MRI(rs-FMRI)检查,研究二者在癫痫病诊断及鉴别中的价值。结果发现,研究组全面发作脑血流量(CBF)、低频振幅(ALFF)<部分发作和对照组,全面发作血清脑源性神经细胞营养因子(BDNF)、胰岛素样生长因子-1(IGF-1)水平、认知功能(MMSE)评分<部分发作<对照组,血清神经肽Y(NPY)>部分发作>对照组(P<0.05),且癫痫患者CBF、ALFF与BDNF、IGF-1、MMSE呈正相关,与NPY呈负相关。CBF与ALFF联合在诊断癫痫发作、鉴别不同癫痫发作类型方面均具有较高应用价值。说明3D-ASL灌注成像及rs-FMRI在癫痫发作诊断及鉴别不同癫痫发作类型方面应用价值较高。     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

采用NND方法计算三维喷管气流场

本文运用NND显式差分格式，计算了三维喷管气流场。气流场计算的基本方程为一般贴体坐标系下三维守恒型的欧拉方程。采用了时间分裂法和Steger-Warming矢通量分裂技术。在喷管内沿周向的每个由轴线和壁面构成的子午面上根据泊松方程生成贴体网格。本文运用三维程序计算了轴对称JPL喷管，同时与实验结果和前人采用轴对称二维程序所计算的结果做了对比。最后，本文还计算了三维矢量喷管，计算结果与现有的实验结果一致。通过轴对称JPL喷管和三维矢量喷管的计算考核，表明建立的算法和编写的计算程序是正确的。文中提出了采用子午面形式的贴体网格时奇性轴的处理方法。计算结果表明在喷管壁面处，马赫数与压强的计算结果与实验值吻合较好，而在喷管轴线处，只有当网格较密时，才能得出与实验结果接近的计算结果。     

Two-dimensional stability problem for two interacting short fibers in a composite: In-line arrangement

A solution is found to a plane problem for a composite material reinforced with two in-line fibers and subjected to longitudinal compression. The problem formulation is based on the piecewise-homogeneous model and the three-dimensional theory of stability. The dependence of the critical strain and buckling mode on the distance between the fibers is studied for various mechanical and geometrical characteristics of the composite components.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 65–74, September 2004.